Atlas Snowshoes- DIY Heel Strap Replacement Kit


In stock



Includes a pair of Atlas heel straps, a pair of heel strap retention clips, 2 washers, 2 bolts, 2 nuts and instructions.  These heel straps are approx. 18.75 inches long and .75 inches wide.

These straps will fit many Atlas (and Tubbs) snowshoe bindings (your current heel straps should look similar and be riveted to the binding at one end).

These heel straps will NOT work on the Pack Flat Bindings.

Estimated time to install:  Estimated time to remove and install a pair of heel straps is less than 20 minutes.

Please see our instructions page for DIY heel strap installation.

Tools you will need: In order to install these you will need a drill, 1/4″ drill bit, a Phillips head screw driver and a 3/8″ wrench or adjustable crescent wrench.

Please note: We are not able to offer installation assistance via phone or email.  If you find that installing this DIY kit is beyond your abilities, we suggest that you enlist the help of your local ski shop.

No returns or exchanges on parts orders. No international sales.



Additional information

Weight 2.5 oz