Description
Please see our instructions to see what is involved in the installation of this kit.
Sizing: These bindings come in two sizes. We are currently only stocking this binding in the size LARGE for 2024.
Large/ Men’s- fits approximately men’s size 8 to 14.
Small/ Women’s- fits approximately women’s sizes 5-11.
Are your bindings cracked or have they crumbled into many small pieces? This is what you are looking for! The Wrapp BC bindings are used on Atlas’s 2024 Montane Back Country model. This is a great binding/crampon package for general all-around use and the straps fit a very wide size range of footwear.
We like these bindings because the adjustment straps are ‘field replaceable’ meaning that in the future, if you have an adjustment strap break, you can replace the adjustment straps (as long as Atlas produces them) without the need to ship your snowshoes in for a repair or drill out rivets.
Will these bindings work on your snowshoes? You need to have existing bindings that rotate on one of the two strap configurations shown below. The new bindings and crampons will mount to these straps. These straps (called toe cords) are are typically very long lasting and robust. If your toe cord is significantly damaged (like enlarged holes) this DIY kit may not work and you may need to have the toe cords replaced (not a DIY project).
Estimated time to install: 30-40 minutes if your bindings are held on with aluminum blind rivets. Possibly longer if your bindings are held on with steel tubular rivets. Do your best not to overheat the rivets when drilling them out of you might melt the toe cords.
Please see our instructions for DIY installation.
What’s Included: This kit includes one pair of Atlas Wrapp BC Bindings with heel straps, 8 bolts, 8 nuts, 8 washers, and 2 steel crampons. For most folks this kit will provide everything needed to replace old cracked bindings. These are a ‘one size fits most’ binding. In rare cases you may need to purchase other hardware from you local hardware store.
Tools you will need: Drill, new 1/4″ drill bit, WD40 or another cutting lubricant (for drilling out rivets), a Phillips head screw driver and a 3/8″ wrench or adjustable crescent wrench.
Please note: Our inventory changes from season to season and the colors of the bindings we have in stock may vary from what is shown in this item description. We can’t guarantee what color bindings you will receive.
We are not able to offer installation assistance via phone or email. If you find that installing this DIY kit is beyond your abilities, we suggest that you enlist the help of your local ski shop.
No returns or exchanges on parts orders. No international sales.
